TL3016, TL3016Y ULTRA-FAST LOW-POWER PRECISION COMPARATORS SLCS130D - MARCH 1997 - REVISED MARCH 2000 D D D D D D D D Ultrafast Operation . . . 7.6 ns (Typ) Low Positive Supply Current 10.6 mA (Typ) Operates From a Single 5-V Supply or From a Split 5-V Supply Complementary Outputs Low Offset Voltage No Minimum Slew Rate Requirement Output Latch Capability Functional Replacement to the LT1016 D AND PW PACKAGE (TOP VIEW) VCC+ IN + IN - VCC- 8 2 7 3 6 4 5 IN + The TL3016 is an ultrafast comparator designed to interface directly to TTL logic while operating from either a single 5-V power supply or dual 5-V supplies. It features extremely tight offset voltage and high gain for precision applications. It has complementary outputs that can be latched using the LATCH ENABLE terminal. Figure 1 shows the positive supply current of this comparator. The TL3016 only requires 10.6 mA (typical) to achieve a propagation delay of 7.6 ns. AVAILABLE OPTIONS PACKAGED DEVICES SMALL OUTLINE (D) TSSOP (PW) CHIP FORM (Y) 0C to 70C TL3016CD TL3016CPWLE TL3016Y - 40C to 85C TL3016ID TL3016IPWLE -- The PW packages are available left-ended taped and reeled only. Chip forms are tested at TA = 25C only. Q OUT Q OUT IN - POSITIVE SUPPLY CURRENT vs FREE-AIR TEMPERATURE 15 14 I CC - Positive Supply Current - mA The TL3016 is a pin-for-pin functional replacement for the LT1016 comparator, offering higher speed operation but consuming half the power. Q OUT Q OUT GND LATCH ENABLE symbol (each comparator) description TA 1 13 IIIII IIIII VCC = 5 V 12 11 10 9 8 7 6 5 - 50 - 25 0 25 50 75 100 TA - Free-Air Temperature - C 125 Figure 1 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright 2000, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 TL3016, TL3016Y ULTRA-FAST LOW-POWER PRECISION COMPARATORS SLCS130D - MARCH 1997 - REVISED MARCH 2000 TL3016Y chip information This chip displays characteristics similar to the TL3016C. Thermal compression or ultrasonic bonding may be used on the doped-aluminum bonding pads. Chips may be mounted with conductive epoxy or a gold-silicon preform. BONDING PAD ASSIGNMENTS VCC+ (1) (5) LATCH ENABLE (1) (1) (8) IN+ (1) IN- (7) (2) + (3) - (8) Q OUT (7) Q OUT (4) (6) VCC - GND (2) 55 (6) CHIP THICKNESS: 10 MILS TYPICAL BONDING PADS: 4 x 4 MILS MINIMUM (3) (6) TJ max = 150C TOLERANCES ARE 10%. (5) (4) ALL DIMENSIONS ARE IN MILS. (6) TERMINALS 1 AND 6 CAN BE CONNECTED TO MULTIPLE PADS. 63 COMPONENT COUNT 2 Bipolars 53 MOSFETs 49 Resistors 46 Capacitors 14 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TL3016, TL3016Y ULTRA-FAST LOW-POWER PRECISION COMPARATORS SLCS130D - MARCH 1997 - REVISED MARCH 2000 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage, VDD (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 7 V to 7 V Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Input voltage range, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Input voltage, VI (LATCH ENABLE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V Output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 mA Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table Operating free-air temperature range, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 40C to 85C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 65C to 150C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values, except differential voltages, are with respect to network ground. 2. Differential voltages are at IN+ with respect to IN -. DISSIPATION RATING TABLE PACKAGE TA 25C POWER RATING D 725 mW 5.8 mW/C 464 mW PW 525 mW 4.2 mW/C 336 mW DERATING FACTOR ABOVE TA = 25C POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TA = 70C POWER RATING 3 TL3016, TL3016Y ULTRA-FAST LOW-POWER PRECISION COMPARATORS SLCS130D - MARCH 1997 - REVISED MARCH 2000 electrical characteristics at specified operating free-air temperature, VDD = 5 V, VLE = 0 (unless otherwise noted) TEST CONDITIONS PARAMETER TL3016C MIN TYP MAX TA = 25C TA = full range 0.5 VIO Input offset voltage VIO Temperature coefficient of input offset voltage IIO Input offset current TA = 25C TA = full range 0.1 IIB Input bias current TA = 25C TA = full range 6 VICR Common-mode input voltage range VDD = 5 V VDD = 5 V CMRR Common-mode rejection ratio -3.75 VIC 3.5 V, kSVR y g rejection j Supply-voltage ratio VOL VOH IDD Low level output voltage Low-level High level output voltage High-level Positive supply current Negative supply current VIL Low-level input voltage (LATCH ENABLE) VIH High-level input voltage (LATCH ENABLE) IIL Low-level input current (LATCH ENABLE) 3 0.5 3.5 0.6 0.1 10 6 10 - 3.75 3.5 - 3.75 3.5 1.25 3.5 1.25 3.5 97 80 97 Positive supply: 4.6 V +VDD 5.4 V, TA = 25C 60 72 60 72 Negative supply: - 7 V -VDD - 2 V, TA = 25C 80 100 80 100 mV A A V dB dB I(sink) = 4 mA, TA = 25C V+ 4.6 V, I(sink) = 10 mA, TA = 25C V+ 4.6 V, V+ 4.6 V, TA = 25C IO = 1 mA, 3.6 3.9 3.6 3.9 V+ 4.6 V, TA = 25C IO = 10 mA, 3.4 3.7 3.4 3.7 500 600 500 600 mV 750 750 V 10.6 -1.8 12.5 -1.3 10.6 -2.4 2 VLE = 0 0.8 2 0 * DALLAS, TEXAS 75265 12.5 -1.3 0.8 POST OFFICE BOX 655303 0.6 10 80 UNIT V/C 1.3 10 TA = full range 3 - 4.5 0.9 TA = 25C MAX 3.5 - 4.8 VLE = 2 V 24 Full range for the TL3016C is TA = 0C to 70C. Full range for the TL3016I is TA = - 40C to 85C. All typical values are measures with TA = 25C. 4 TL3016I MIN TYP mA V V 1 0 1 39 24 45 A TL3016, TL3016Y ULTRA-FAST LOW-POWER PRECISION COMPARATORS SLCS130D - MARCH 1997 - REVISED MARCH 2000 switching characteristics, VDD = 5 V, VLE = 0 (unless otherwise noted) tpd1 d1 tsk(p) Propagation delay dela time Pulse skew (|tpd+ - tpd-|) TL3016C TEST CONDITIONS PARAMETER MIN TYP TL3016I MAX MIN TYP MAX VI = 100 mV,, VOD = 5 mV TA = 25C TA = full range 7.8 10 7.8 10 7.8 11.2 7.8 12.2 VI = 100 mV,, VOD = 20 mV TA = 25C TA = full range 7.6 10 7.6 10 7.6 11.2 7.6 12.2 VI = 100 mV, TA = 25C VOD = 5 mV, 0.5 0.5 UNIT ns ns tsu Setup time, LATCH ENABLE 2.5 2.5 ns Full range for the TL3016C is 0C to 70C. Full range for the TL3016I is - 40C to 85C. tpd1 cannot be measured in automatic handling equipment with low values of overdrive. The TL3016 is 100% tested with a 1-V step and 500-mV overdrive at TA = 25C only. Correlation tests have shown that tpd1 limits given can be ensured with this test, if additional dc tests are performed to ensure that all internal bias conditions are correct. For low overdrive conditions, VOS is added to the overdrive. TYPICAL CHARACTERISTICS Table of Graphs FIGURE ICC ICC tpd VIC Positive supply current Negative supply current Propagation delay time vs Input voltage 2 vs Frequency 3 vs Free-air temperature 4 vs Free-air temperature 5 vs Overdrive voltage 6 vs Supply voltage 7 vs Input impedance 8 vs Load capacitance 9 vs Free-air temperature 10 Common-mode input voltage vs Free-air temperature 11 Input threshold voltage (LATCH ENABLE) vs Free-air temperature 12 vs Output source current 13 vs Output sink current 14 vs Input voltage 15 VO Output voltage II Input current (LATCH ENABLE) POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 5 TL3016, TL3016Y ULTRA-FAST LOW-POWER PRECISION COMPARATORS SLCS130D - MARCH 1997 - REVISED MARCH 2000 TYPICAL CHARACTERISTICS POSITIVE SUPPLY CURRENT vs FREQUENCY POSITIVE SUPPLY CURRENT vs INPUT VOLTAGE IIII IIII IIII 20 16 I CC - Positive Supply Current - mA 18 I CC - Positive Supply Current - mA 22 VCC = 5 V TA = 25C TA = 85C 14 TA = 25C 12 10 8 TA = - 40C 6 4 20 IIIII IIIII IIIII VCC = 5 V TA = 25C 18 TA = 85C 16 TA = 25C 14 12 TA = - 40C 10 2 0 8 1 2 3 4 5 6 7 8 101 0 f - Frequency - MHz VI - Input Voltage - V Figure 2 Figure 3 POSITIVE SUPPLY CURRENT vs FREE-AIR TEMPERATURE I CC - Positive Supply Current - mA 14 NEGATIVE SUPPLY CURRENT vs FREE-AIR TEMPERATURE IIIII 0 VCC = 5 V IIIII IIIII VCC = 5 V I CC - Negative Supply Current - mA 15 102 13 12 11 10 9 8 7 - 0.5 -1 - 1.5 -2 - 2.5 6 5 - 50 - 25 0 25 50 75 100 TA - Free-Air Temperature - C 125 -3 - 50 75 100 - 25 0 25 50 TA - Free-Air Temperature - C Figure 4 6 Figure 5 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 125 TL3016, TL3016Y ULTRA-FAST LOW-POWER PRECISION COMPARATORS SLCS130D - MARCH 1997 - REVISED MARCH 2000 TYPICAL CHARACTERISTICS PROPAGATION DELAY TIME vs OVERDRIVE VOLTAGE PROPAGATION DELAY TIME vs SUPPLY VOLTAGE IIIII IIIII IIIII 10 VCC = 5 V TA = 25C t pd - Propagation Delay Time - ns t pd - Propagation Delay Time - ns 9 IIIII IIIII IIIII 12 VCC = 5 V TA = 25C 8 7 6 5 4 3 2 10 Falling Edge 8 Rising Edge 6 4 2 1 0 0 10 20 40 30 0 4.4 50 4.6 Overdrive Voltage - mV 5.2 4.8 5 VCC - Supply Voltage - V Figure 6 PROPAGATION DELAY TIME vs LOAD CAPACITANCE IIIII IIIII 20 t pd - Propagation Delay Time - ns t pd - Propagation Delay Time - ns VCC = 5 V TA = 25C 9 16 14 5 mV 10 8 20 mV 6 4 tPDHL 8 tPDLH 7 6 5 4 3 2 1 2 0 IIIII IIIII 10 VCC = 5 V TA = 25C 12 5.6 Figure 7 PROPAGATION DELAY TIME vs INPUT IMPEDANCE 18 5.4 0 0 50 200 100 150 ZO - Input Impedance - 250 300 0 Figure 8 10 20 30 40 CL - Load Capacitance - pF 50 Figure 9 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 7 TL3016, TL3016Y ULTRA-FAST LOW-POWER PRECISION COMPARATORS SLCS130D - MARCH 1997 - REVISED MARCH 2000 TYPICAL CHARACTERISTICS PROPAGATION DELAY TIME vs FREE-AIR TEMPERATURE 25 COMMON-MODE INPUT VOLTAGE vs FREE-AIR TEMPERATURE IIIII IIIII 6 20 VIC - Common-Mode Input Voltage - V t pd - Propagation Delay Time - ns VCC = 5 V 15 Rising Edge 10 Falling Edge 5 0 - 50 - 25 75 100 0 25 50 TA - Free-Air Temperature - C 4 VCC = 5 V (Upper Limit) VCC = 5 V (Upper Limit) 2 IIIIIIII IIIIIIII 0 VCC = 5 V (Lower Limit) -2 IIIIIIII IIIIIIII -4 -6 - 50 125 IIIIIIII IIIIIIII VCC = 5 V (Lower Limit) - 25 0 25 50 75 100 TA - Free-Air Temperature - C Figure 10 Figure 11 OUTPUT VOLTAGE vs OUTPUT SOURCE CURRENT IIII 1.8 VCC = 5 V TA = 25C 4.8 4.6 1.6 1.4 1.2 1 0.8 0.6 4.4 3.6 3.2 3 150 TA = - 40C 3.8 0.2 0 25 50 75 100 125 TA - Free-Air Temperature - C 0 5 10 Figure 13 POST OFFICE BOX 655303 15 IO(source) - Output Source Current - mA Figure 12 8 TA = 25C 4 3.4 -25 TA = 85C 4.2 0.4 0 -50 IIIII IIIII 5 VCC = 5 V VO - Output Voltage - V VIT - Input Threshold Voltage (LATCH ENABLE) - V INPUT THRESHOLD VOLTAGE (LATCH ENABLE) vs FREE-AIR TEMPERATURE 2 125 * DALLAS, TEXAS 75265 20 TL3016, TL3016Y ULTRA-FAST LOW-POWER PRECISION COMPARATORS SLCS130D - MARCH 1997 - REVISED MARCH 2000 TYPICAL CHARACTERISTICS OUTPUT VOLTAGE vs OUTPUT SINK CURRENT 1.8 VO - Output Voltage - V 1.6 IIIII IIIII IIIII 1.4 1.2 TA = 25C 1 TA = - 40C 0.8 0.6 TA = 85C 0.4 0.2 0 0 15 10 IO(sink) - Output Sink Current - mA 5 IIIII IIIII IIIII 30 VCC = 5 V TA = 25C I I - Input Current (LATCH ENABLE) - A 2 INPUT CURRENT (LATCH ENABLE) vs INPUT VOLTAGE 20 25 VCC = 5 V TA = 25C 20 15 10 5 0 -5 - 10 - 15 - 20 - 0.5 Figure 14 0 0.5 1 VI - Input Voltage - V 1.5 2 Figure 15 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 9 PACKAGE OPTION ADDENDUM www.ti.com 23-Apr-2010 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty TL3016CD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3016CDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3016CDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3016CDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3016CPW ACTIVE TSSOP PW 8 150 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3016CPWG4 ACTIVE TSSOP PW 8 150 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3016CPWLE OBSOLETE TSSOP PW 8 TL3016CPWR ACTIVE TSSOP PW 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3016CPWRG4 ACTIVE TSSOP PW 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3016ID ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3016IDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3016IDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3016IDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3016IPW ACTIVE TSSOP PW 8 150 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3016IPWG4 ACTIVE TSSOP PW 8 150 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3016IPWLE OBSOLETE TSSOP PW 8 TL3016IPWR ACTIVE TSSOP PW 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL3016IPWRG4 ACTIVE TSSOP PW 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TBD TBD Lead/Ball Finish Call TI Call TI MSL Peak Temp (3) Call TI Call TI (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Addendum-Page 1 PACKAGE OPTION ADDENDUM www.ti.com 23-Apr-2010 Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 19-Aug-2010 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant TL3016CDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TL3016CPWR TSSOP PW 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.0 Q1 TL3016IDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TL3016IPWR TSSOP PW 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 19-Aug-2010 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TL3016CDR SOIC D 8 2500 346.0 346.0 29.0 TL3016CPWR TSSOP PW 8 2000 346.0 346.0 29.0 TL3016IDR SOIC D 8 2500 346.0 346.0 29.0 TL3016IPWR TSSOP PW 8 2000 346.0 346.0 29.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Audio www.ti.com/audio Communications and Telecom www.ti.com/communications Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps DLP(R) Products www.dlp.com Energy and Lighting www.ti.com/energy DSP dsp.ti.com Industrial www.ti.com/industrial Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical Interface interface.ti.com Security www.ti.com/security Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Power Mgmt power.ti.com Transportation and Automotive www.ti.com/automotive Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com Wireless www.ti.com/wireless-apps RF/IF and ZigBee(R) Solutions www.ti.com/lprf TI E2E Community Home Page e2e.ti.com Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2011, Texas Instruments Incorporated